CloudBoost: Check NTP Configuration

Summary: This article explains how to check NTP settings for CloudBoost.

Acest articol se aplică pentru Acest articol nu se aplică pentru Acest articol nu este legat de un produs specific. Acest articol nu acoperă toate versiunile de produs existente.
Consultați alte resurse

Instructions

Checking NTP settings is vital for services sensitive to clock skew within CloudBoost.
 
NTP settings can be manually checked within the CloudBoost command line (CLI):
  1. Sign into the CloudBoost CLI with the admin user.
  2. Run the command 'diagnostics ntpcheck'.
CloudBoost then validates the NTP settings and attempts to sync.
 
Details about the CloudBoost NTP settings can also be found by running 'diagnostics ntpcheck advanced'.
 
Example:
admin@mag-fs> diagnostics ntpcheck advanced

NTP query details
=================
associd=0 status=c011 leap_alarm, sync_unspec, 1 event, freq_not_set,
version="ntpd 4.2.6p5@1.2349-o Mon Apr 13 13:39:46 UTC 2015 (1)",
processor="x86_64", system="Linux/3.16.0-59-generic", leap=11,
stratum=16, precision=-22, rootdelay=0.000, rootdisp=22443.660,
refid=INIT, reftime=00000000.00000000  Mon, Jan  1 1900  0:00:00.000,
clock=de35fe44.4214ed43  Tue, Feb 20 2018  1:54:12.258, peer=0, tc=3,
mintc=3, offset=0.000, frequency=0.000, sys_jitter=0.000,
clk_jitter=0.000, clk_wander=0.000

remote           refid      st t when poll reach   delay   offset  jitter
==============================================================================
<IP_ADDRESS>   .INIT.       16 u    - 1024    0    0.000    0.000   0.000

Additional Information

The 'ntpcheck' command is only available in CloudBoost 2.1.x and higher.

Produse afectate

CloudBoost, CloudBoost Virtual Appliance
Proprietăți articol
Article Number: 000010806
Article Type: How To
Ultima modificare: 11 iun. 2026
Version:  5
Găsiți răspunsuri la întrebările dvs. de la alți utilizatori Dell
Servicii de asistență
Verificați dacă dispozitivul dvs. este acoperit de serviciile de asistență.