Avamar: Backend Capacity Report for Data Domain fails to run: "Feature is not enabled"
Summary: An Avamar backend capacity report does not run for Data Domain, reporting "Feature is not enabled".
Acest articol se aplică pentru
Acest articol nu se aplică pentru
Acest articol nu este legat de un produs specific.
Acest articol nu acoperă toate versiunile de produs existente.
Symptoms
The Backend Capacity Report for Data Domain (DD) does not run, reporting "Feature is not enabled" (as shown below):
Cause
The Backend Capacity Report for Data Domain requires the compression physical-capacity-measurement function on Data Domain, available on Data Domain Operating System (DDOS) 5.7.x and greater, to be enabled.
Resolution
1. Ensure that the Data Domain is running DDOS 5.7.x or later.
2. Verify that the physical-capacity-measurement function is enabled on the Data Domain:
compression physical-capacity-measurement status
If enabled:
physical-capacity-measurement is enabled.
Initialization was not requested.
If disabled:
physical-capacity-measurement is disabled.
3. If disabled, enable using the following command:
compression physical-capacity-measurement enable
physical-capacity-measurement enabled.Produse afectate
AvamarProduse
AvamarProprietăți articol
Article Number: 000057575
Article Type: Solution
Ultima modificare: 21 oct. 2025
Version: 5
Găsiți răspunsuri la întrebările dvs. de la alți utilizatori Dell
Servicii de asistență
Verificați dacă dispozitivul dvs. este acoperit de serviciile de asistență.