Dell EMC Unity: System time sync with NTP server not correct after DIP
Summary: Dell EMC Unity: System time sync with NTP server not correct after DIP (User Correctable)
Acest articol se aplică pentru
Acest articol nu se aplică pentru
Acest articol nu este legat de un produs specific.
Acest articol nu acoperă toate versiunile de produs existente.
Symptoms
- After a DIP conversion took place successfully, a domain joined NAS Server was created. The SMB configuration failed due to system time not being within 5 minutes of the Active Directory server which was the same server as NTP. This was odd because prior to the upgrade, the NTP server was configured successfully in system settings and they were able to create a NAS Server with Active Directory successfully.
Cause
DIP conversion process did not update the system time during the DIP conversion process.
Resolution
Checking settings, it was seen that the system time was not aligned with the NTP server time even though the IP address remained configured. After removing the NTP server address and re-adding it then rebooting the system, the time was correct again and NAS server creation passed well.
This problem is resolved in 4.2 Unity code.
This problem is resolved in 4.2 Unity code.
Produse afectate
Dell EMC Unity FamilyProduse
Dell Unity 300, Dell EMC Unity 400, Dell EMC Unity 500, Dell EMC Unity 600, Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family, Dell EMC Unity HybridProprietăți articol
Article Number: 000061553
Article Type: Solution
Ultima modificare: 20 oct. 2025
Version: 4
Găsiți răspunsuri la întrebările dvs. de la alți utilizatori Dell
Servicii de asistență
Verificați dacă dispozitivul dvs. este acoperit de serviciile de asistență.