MD Series: How to update MD3060e EMMs connected to MD3x60x controllers

Summary: This article covers the steps used to update MD3060e Enclosure Management Modules (EMMs) connected to MD3x60 raid controllers.

Acest articol se aplică pentru Acest articol nu se aplică pentru Acest articol nu este legat de un produs specific. Acest articol nu acoperă toate versiunile de produs existente.
Consultați alte resurse

Instructions

This tutorial covers the update of MD3060e daisy chained with MD3x60 array using Modular Disk Storage Manager (MDSM).

EMM updates can be made in production if the cabling is correct. The Recovery Guru indicates if there are any issues. If there are any issues, contact Support for assistance.

Prerequisites:

Steps:

  1. Verify that the storage array is optimal
    1. Open MDSM
    2. Double-click or right click -> Manage on the wanted storage array
    3. Check that the array shows Optimal
    4. If it shows "Needs Attention",
      1. Work through the listed errors
      2. Contact Support if assistance is needed
  2. Click Upgrade on the Tool bar
  3. Click EMM Firmware
    1. mdsm update
  4.  The update window opens
    1.  mdsm update  
  5.  Click Select File...
  6. Find the MD3060e_Firmware_039F.esm from the downloaded file
  7.  Click Start
  8. There is a confirmation message when the update completes

Produse afectate

MD Series, PowerVault MD3060e
Proprietăți articol
Article Number: 000140942
Article Type: How To
Ultima modificare: 21 mar. 2025
Version:  9
Găsiți răspunsuri la întrebările dvs. de la alți utilizatori Dell
Servicii de asistență
Verificați dacă dispozitivul dvs. este acoperit de serviciile de asistență.