Connectrix MDS: M3: EOBC heartbeat failure in device DEV_EOBC_MAC
Summary: M3 line card may be reset after system reports EOBC heartbeat failure:
Acest articol se aplică pentru
Acest articol nu se aplică pentru
Acest articol nu este legat de un produs specific.
Acest articol nu acoperă toate versiunile de produs existente.
Symptoms
M3 line card may be reset after system reports EOBC heartbeat failure: --- snip ---
%MODULE-4-MOD_WARNING: Module X (Serial number: DUMMYNUMBER) reported warning X/1-X/0 due to EOBC heartbeat failure in device DEV_EOBC_MAC (device error 0xc0a0614f)
%MODULE-4-MOD_WARNING: Module X (Serial number: DUMMYNUMBER) reported warning X/1-X/0 due to EOBC heartbeat failure in device DEV_EOBC_MAC (device error 0xc0a0614d)
%MODULE-2-MOD_NOT_ALIVE: Module X not responding... resetting (Serial number: DUMMYNUMBER)
--- snip ---
Cause
Conditions:
The particular trigger is not known, though the issue should be conditioned as exceptionally rare.
The particular trigger is not known, though the issue should be conditioned as exceptionally rare.
Resolution
Workaround:
Line card come online after reload. No particular workaround proposed.
Line card come online after reload. No particular workaround proposed.
Additional Information
Some EOBC heartbeat loss was seen due to which LC got rebooted and came back online. The reason for heartbeat loss is not known, though this is extremely rare.
Produse afectate
Connectrix MDS-9250i, Connectrix MDS-9710Proprietăți articol
Article Number: 000185923
Article Type: Solution
Ultima modificare: 29 aug. 2025
Version: 5
Găsiți răspunsuri la întrebările dvs. de la alți utilizatori Dell
Servicii de asistență
Verificați dacă dispozitivul dvs. este acoperit de serviciile de asistență.