PowerEdge: Dell E810-2C Network Adapter Error When Applying Default Settings

Zhrnutie: An error occurs when attempting to apply default settings to a Dell Intel E810-2C Ethernet Adapter. These adapters are configured with Permit Total Port Shutdown enabled. Both ports have Port Option set to 4x25. ...

Tento článok sa vzťahuje na Tento článok sa nevzťahuje na Tento článok nie je viazaný na žiadny konkrétny produkt. V tomto článku nie sú uvedené všetky verzie produktov.
Pozrite si ďalšie zdroje

Symptómy

When setting to default, the following error may be seen.

Critical Error Showing Default Failure
 
 

Príčina

This is a design limitation related to port enumeration. No other changes should be made when changing Port Option. When setting to Default, all configuration options are changed at once.

Riešenie

To address this, change these settings to default manually:

  • Permit Total Port Shutdown: Disabled
  • Port Option: Option 0: 2x1x100G

Dotknuté produkty

Intel PRO Family of Adapters, PowerEdge R350, PowerEdge R440, PowerEdge R450, PowerEdge R540, PowerEdge R550, PowerEdge R640, PowerEdge R6415, PowerEdge R650, PowerEdge R650xs, PowerEdge R6515, PowerEdge R6525, PowerEdge R740, PowerEdge R740XD , PowerEdge R740XD2, PowerEdge R7415, PowerEdge R7425, PowerEdge R750, PowerEdge R750XA, PowerEdge R750xs, PowerEdge R7515, PowerEdge R7525, PowerEdge R840, PowerEdge R940, PowerEdge R940xa, PowerEdge T350, PowerEdge T360, PowerEdge T550, PowerEdge T560, PowerFlex appliance R650, Powerflex appliance R750, PowerFlex appliance R640, PowerFlex appliance R740XD, PowerFlex appliance R7525, PowerFlex appliance R840 ...
Vlastnosti článku
Číslo článku: 000221407
Typ článku: Solution
Dátum poslednej úpravy: 19 máj 2026
Verzia:  4
Nájdite odpovede na svoje otázky od ostatných používateľov spoločnosti Dell
Služby podpory
Skontrolujte, či sa na vaše zariadenie vzťahujú služby podpory.