NetWorker: Running the linux_pkgcore.sh Script Does Not Detect NetWorker Binaries Properly

Zhrnutie: NetWorker issue with /usr/sbin/nsrd version 19.12.0.1, identified as a shared object, not an executable, by linux_pkgcore.sh script, due to position independent code settings, upgrading file to version 5.39 or newer resolves the issue. ...

Tento článok sa vzťahuje na Tento článok sa nevzťahuje na Tento článok nie je viazaný na žiadny konkrétny produkt. V tomto článku nie sú uvedené všetky verzie produktov.
Pozrite si ďalšie zdroje

Symptómy

Script Execution Failure

The linux_pkgcore.sh script fails to perform properly.

The script returns a message indicating that it cannot determine if /usr/sbin/nsrd is a link or start script.

 

Message Details

The message displayed is: "Is /usr/sbin/nsrd a link or start script? Please check! Binary Executable needed as argument"

file /usr/sbin/nsrd-19.12.0.1 | grep 'ELF'
/usr/sbin/nsrd-19.12.0.1: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 2.6.32, BuildID[sha1]=500dfce10db947d45391e7eb5e7eb8f850815f10, stripped

📋

 

Príčina

Root Cause of the Issue

The root cause of the issue is the misidentification of the nsrd executable as a shared object by the file command.

This misidentification is due to the use of certain settings related to position independent code, which can sometimes be considered an extra security feature.

 

Specific Conditions

The specific conditions that led to this issue include the use of the file command, which can cause the file command to incorrectly identify the nsrd executable as a shared object.

  • The version of the file command being used is older than 5.39, which does not correctly identify the nsrd executable.
  • The nsrd executable is being built with position-independent code, which can cause the misidentification.

 

Error Messages

file /usr/sbin/nsrd-19.12.0.1 | grep 'ELF'
/usr/sbin/nsrd-19.12.0.1: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 2.6.32, BuildID[sha1]=500dfce10db947d45391e7eb5e7eb8f850815f10, stripped
NOTE: The issue is not with the nsrd executable itself, but with the file command's inability to correctly identify it.

Riešenie

Upgrading the File Command

To resolve the issue, upgrade the `file` command to version 5.39, or newer. This should provide the expected results to the pkgcore script.

 

Steps to Upgrade

Follow these steps to upgrade the `file` command:

  • Check the current version of the `file` command.
  • Download and install the latest version of the `file` command (version 5.39 or newer).

Verifying the Resolution

After upgrading the `file` command, verify that the issue has been resolved by running the `linux_pkgcore.sh` script again.

# Run the linux_pkgcore.sh script to verify the resolution
$ ./linux_pkgcore.sh
NOTE: NetWorker engineering is working on a resolution.

Dotknuté produkty

NetWorker

Produkty

NetWorker Family
Vlastnosti článku
Číslo článku: 000329028
Typ článku: Solution
Dátum poslednej úpravy: 25 máj 2026
Verzia:  4
Nájdite odpovede na svoje otázky od ostatných používateľov spoločnosti Dell
Služby podpory
Skontrolujte, či sa na vaše zariadenie vzťahujú služby podpory.