VNX/Unity: Cinder driver requires storops with Red Hat OpenStack Platform 10 (User Correctable)
摘要: OpenStack Cinder Driver for Block requires Storops package for RED HAT 10.
本文适用于
本文不适用于
本文并非针对某种特定的产品。
本文并非包含所有产品版本。
症状
Implementing OpenStack Cinder in RedHat Enterprise 10 Environment.
Using the VNX Cinder Driver with Red Hat OpenStack Platform 10 results in "Failed to initialize driver" errors.
Using the VNX Cinder Driver with Red Hat OpenStack Platform 10 results in "Failed to initialize driver" errors.
原因
With Red Hat OpenStack Platform 10, the Dell EMC storops (https://github.com/emc-openstack/storops) library must be installed on each host utilizing the VNX Cinder Driver. Storops is created and maintained by Dell EMC and is a Python library used to send commands to the VNX system. The storops library is not included in a basic installation of Red Hat OpenStack Platform 10.
解决方案
Install storops on each OpenStack host that is using the VNX Cinder driver.
Refer to the latest release with the "noarch" package from this location: https://github.com/emc-openstack/storops/releases.
Alternatively, the pip package manager may be used (ex. "pip install storops"). See the Dell EMC GitHub page for more details on installing storops: https://github.com/emc-openstack/storops
Refer to the latest release with the "noarch" package from this location: https://github.com/emc-openstack/storops/releases.
Alternatively, the pip package manager may be used (ex. "pip install storops"). See the Dell EMC GitHub page for more details on installing storops: https://github.com/emc-openstack/storops
其他信息
Red Hat is also aware of this new dependency.
Details can be found on Red Hat's support site: https://access.redhat.com/solutions/2888591
受影响的产品
VNX/VNXe产品
Dell EMC Unity Family, VNX/VNXe文章属性
文章编号: 000065199
文章类型: Solution
上次修改时间: 30 5月 2024
版本: 4
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。