Dell Networking X Series: How to Check MAC Address Table Using WebGUI and CLI

This article explains how to check mac address table on the Dell Networking X series switches through WebGUI or CLI.

We can find the mac address of the devices connected to the switch by using following methods.

1. Check using WebGUI
2. Check Using Command Line (CLI)
 

Check Using WebGUI

Step 1:  Click Network Administration -> Port Settings -> Address Tables

Step 2: Click "Dynamic Address Table" to check the mac address of all devices connected to this switch.



 

Check Using Command Line (CLI)

Sample Output

In the below example, the output shows the mac address learned in vlan 30.

console# show mac address-table vlan 30

Flags: I - Internal usage VLAN

Aging time is 300 sec

 Vlan          Mac Address         Port       Type
------------ --------------------- ---------- ----------
   30        XX:XX:XX:XX:XX:XX   gi1/0/1    dynamic

In the below example, the output shows the mac address learned on the interface gi1/0/1.

console# show mac address-table interface GigabitEthernet 1/0/1

Flags: I - Internal usage VLAN

Aging time is 300 sec

    Vlan          Mac Address         Port       Type
------------ --------------------- ---------- ----------
    1         XX:XX:XX:XX:XX:XX   gi1/0/1    dynamic
   30        XX:XX:XX:XX:XX:XX   gi1/0/1    dynamic

.

.