The Secure Boot Error Message Prompts During the Restore Process

摘要: An Ubuntu 20.04 device with Dell Client Agent - Enabler (DCA Enabler) configured encounters a Secure Boot error message that is displayed while the operating system restore is in process. ...

本文适用于 本文不适用于 本文并非针对某种特定的产品。 本文并非包含所有产品版本。
查看其他资源

症状

Affected Products:

  • Most products shipping with Ubuntu 20.04 with DCA Enabler configuration
Note: Observed mostly on products that have an NVIDIA driver

User performs recovery option on the device and the device starts the restore process, then the below message is displayed. The device is stops responding and cannot progress.

Secure Boot error message
Figure 1: (English Only) Error message received during Ubuntu recovery process

原因

This issue is happening because the Dell Recovery Tool detects the device to be a Dell Hybrid Client computer while recovery and during Ubuntu Base operating system install it skips some scripts (relevant to Secure boot pre-apply configuration to backup existing signature keys). Then, it tries to reenable the Secure boot which results in the above dialog being displayed for NVIDIA driver component devices. The workflow should be to install standard Ubuntu for a DCA Enabler.

解决方案

To resolve this:

  1. Once the user is on the above screen, shut the device down, and then power the device back on.
  2. While restarting, disable secure boot manually from the BIOS, save, and exit.
Note:
  • This process varies depending on the device.
  • The device reboots.
  1. Once restarted, the restore process should continue.

受影响的产品

Dell Hybrid Client
文章属性
文章编号: 000195379
文章类型: Solution
上次修改时间: 30 9月 2024
版本:  4
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。