Dell Networking Force10 OS9 How to Configure a Switch as an FTP Server

摘要: This article explains how to use DELL OS9 switch as an FTP server for uploading or downloading files from a local flash.

本文适用于 本文不适用于 本文并非针对某种特定的产品。 本文并非包含所有产品版本。
查看其他资源

说明

Dell Networking OS9 supports an FTP server function. This can be used for transferring a file like a core dump or packet capture in a switch to a local machine and back.

Sample configuration 
DELLEMC#
DELLEMC#configure
DELLEMC(conf)#ftp-server topdir flash:
DELLEMC(conf)#ftp-server username <username> password <password>
DELLEMC(conf)#ftp-server enable
 
NOTE: The FTP user gets both read and write permission to the directory specified in ftp-server topdir. We can copy a file in to and out of the switch.

Configuration Syntax
 
Command Syntax 
DELLEMC#configure
 Enter configure mode. 
DELLEMC(conf)#ftp-server enable
 Enable FTP server Function. 
DELLEMC(conf)#ftp-server username <username> password <password>
 Configure an FTP username and password.
The username and password can be 40 Characters long.
 		 
DELLEMC(conf)#ftp-server username <username> password 7 <password>
 7 Specifies a HIDDEN password as follows. The password is encrypted in configuration (Optional).
 		 
DELLEMC(conf)#ftp-server topdir flash:
 Specify the directory FTP is to access. If nothing is specified 
DELLEMC(conf)# ftp-server vrf <any/management>
 (Optional) Specify any to allow FTP server access to any vrf.
Management is used when FTP server access is limited to management vrf.


We use utilities like winscp to access the switch using FTP.
 
Winscp use port 21 File protocol FTP
 

受影响的产品

OS9
文章属性
文章编号: 000211113
文章类型: How To
上次修改时间: 31 1月 2024
版本:  2
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。