Ripristino dagli attacchi informatici: Impossibile configurare multilink per CyberSense: impossibile annullare l'array in Go struct
摘要: Dopo l'aggiornamento a Cyber Recovery 19.13 e CyberSense 8.2.0-1.12, il tentativo di configurare Multilink per analizzare le copie non è in grado di completare.
本文适用于
本文不适用于
本文并非针对某种特定的产品。
本文并非包含所有产品版本。
症状
La GUI di configurazione di Cyber Recovery Mutlilink mostra quanto segue:
All'interno del registro/edge/edge.log, è possibile osservare quanto segue che corrisponde alla schermata nella GUI di configurazione multilink in Cyber Recovery:
All'interno del registro/edge/edge.log, è possibile osservare quanto segue che corrisponde alla schermata nella GUI di configurazione multilink in Cyber Recovery:
[XXXX-05-10 13:32:20.393] [DEBUG] [edge] [restapi_client.go:139 CallCRRESTAPI()] : Perform request.Get path=https://apps:9095/irapi/v7/apps/XXXXXXXXXXXXXXXXXXXXXXXX/csnetworkinfo
[XXXX-05-10 13:32:20.519] [DEBUG] [edge] [restapi_client.go:148 CallCRRESTAPI()] : status = 400 Bad Request
[XXXX-05-10 13:32:20.519] [DEBUG] [edge] [restapi_client.go:321 GetCRResponse()] : Entering
[XXXX-05-10 13:32:20.519] [DEBUG] [edge] [restapi_client.go:328 GetCRResponse()] : Exiting
[XXXX-05-10 13:32:20.519] [DEBUG] [edge] [restapi_client.go:149 CallCRRESTAPI()] : Exiting
[XXXX-05-10 13:32:20.519] [DEBUG] [edge] [restapi_client.go:55 CallRESTAPIHeader()] : Exiting
[XXXX-05-10 13:32:20.519] [DEBUG] [edge] [restapi_client.go:295 HandleRESTAPIResponse()] : Entering
[XXXX-05-10 13:32:20.519] [DEBUG] [edge] [restapi_client.go:303 HandleRESTAPIResponse()] : REST status code :400
[XXXX-05-10 13:32:20.519] [ERROR] [edge] [restapi_client.go:312 HandleRESTAPIResponse()] : Failed to retrieve network information for CyberSense with ID : XXXXXXXXXXXXXXXXXXXXXXXX. Cannot unmars
hall response to CyberSense network information response. json: cannot unmarshal array into Go struct field .speed of type string
[XXXX-05-10 13:32:20.519] [DEBUG] [edge] [restapi_client.go:313 HandleRESTAPIResponse()] : Exiting
[XXXX-05-10 13:32:20.519] [ERROR] [edge] [edge.go:1474 GetMultiLinkNetInterfaces()] : Failed to retrieve network information for CyberSense with ID : XXXXXXXXXXXXXXXXXXXXXXXX. Cannot unmarshall
response to CyberSense network information response. json: cannot unmarshal array into Go struct field .speed of type string
[XXXX-05-10 13:32:20.519] [DEBUG] [edge] [jsonerr.go:27 JSONError()] : Entering
[XXXX-05-10 13:32:20.519] [ERROR] [edge] [jsonerr.go:40 JSONError()] : 500 : Failed to retrieve network information for CyberSense with ID : XXXXXXXXXXXXXXXXXXXXXXXX. Cannot unmarshall response
to CyberSense network information response. json: cannot unmarshal array into Go struct field .speed of type string
[XXXX-05-10 13:32:20.519] [DEBUG] [edge] [jsonerr.go:44 JSONError()] : Exiting
[XXXX-05-10 13:32:20.519] [DEBUG] [edge] [edge.go:1476 GetMultiLinkNetInterfaces()] : Exiting
[XXXX-05-10 13:32:20.519] [INFO] [edge] [restauth.go:99 func1()] : GET /cr/v7/apps/XXXXXXXXXXXXXXXXXXXXXXXX/multilinknetinterfaces End GetMultiLinkInterfaces Elapsed=127.933414ms原因
Si è verificato un problema software nella release 8.2.0-1.12. Questo è stato fatto con l'API REST utilizzata da Cyber Recovery per rilevare tutte le interfacce CyberSense.
Restituisce una risposta json non valida se una o più interfacce CyberSense non sono configurate o non sono abilitate.
Cyber Recovery non è riuscito ad analizzare questa risposta e viene visualizzato l'errore visualizzato sia nei registri che in Cyber Recovery.
Restituisce una risposta json non valida se una o più interfacce CyberSense non sono configurate o non sono abilitate.
Cyber Recovery non è riuscito ad analizzare questa risposta e viene visualizzato l'errore visualizzato sia nei registri che in Cyber Recovery.
解决方案
Questo problema è risolto in CyberSense 8.2.0-1.23.
文章属性
文章编号: 000214851
文章类型: Solution
上次修改时间: 14 9月 2023
版本: 2
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。