iDRAC: How to Generate and Install an SSL Cert Using FQDN and CA

摘要: This article describes the steps to generate the self-signed certificate and upload to iDRAC.

本文适用于 本文不适用于 本文并非针对某种特定的产品。 本文并非包含所有产品版本。
查看其他资源

症状

The system reports the following error:

RAC0622: An invalid certificate file is uploaded Make sure the CA certificate and provide key are correct and retry the operation. Certificate validated using the OpenSSL tools. 

原因

N/A

解决方案

  1. Enable and register the iDRAC IP into the Domain Name Service (DNS) server
  2. Use the Fully Qualified Domain Name (FQDN) created at DNS to enter at Common Name (CN) fields and generate the Certificate Signing Request (CSR) and use Certificate Authority (CA) to sign it then upload to iDRAC.
  3. Browse to the iDRAC portal by it is FQDN.

受影响的产品

iDRAC9 - 3.3x Series, iDRAC9 - 3.4x Series, iDRAC9 - 4.xx Series, iDRAC9 - 5.xx Series, iDRAC9 - 6.xx Series, iDRAC9 - 7.xx Series
文章属性
文章编号: 000216023
文章类型: Solution
上次修改时间: 11 11月 2025
版本:  4
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。