ECS: OBS: Een NTP-server toevoegen of verwijderen

摘要: In dit artikel wordt beschreven hoe u de ECS NTP-configuratie wijzigt.

本文适用于 本文不适用于 本文并非针对某种特定的产品。 本文并非包含所有产品版本。
查看其他资源

说明

Belangrijke opmerking: Er is een nieuwe functie uitgebracht in xDoctor 4-8.104.0 en hoger. Deze Knowledge Base (KB) is nu geautomatiseerd met xDoctor om snel te proberen een NTP-server toe te voegen of te verwijderen. Als het script geen NTP-server kan toevoegen of verwijderen, biedt het een gedetailleerde samenvatting van de bevindingen.  
Volg het artikel ECS ObjectScale voor meer informatie: KB Automation Scripts uitvoeren (automatische piloot) (aanmelden bij Dell Support als een geregistreerde gebruiker is mogelijk vereist.)
 
  1. Om het NAN IP-adres te vinden, kunt u het IP-adres gebruiken dat in de waarschuwing wordt geïdentificeerd of van getclusterinfo -i voor uw doel met dit script.
Opdracht: 
# getclusterinfo -i
Voorbeeld: 
admin@ecsnode1:~> getclusterinfo -i

Registered Racks
================

Ip Address        epoxy   seg mac             seg color    seg id    NAN Hostname
===============   =====   =================   ==========   =======   ============
169.xxx.1.1      False   00:00:00:00:00:00   red          1         provo-red.nanlocal
Node private      Node              Public                                BMC
Ip Address        Id       Status   Mac                 Ip Address        Mac                 Ip Address        Private.4(NAN)    Node Name
===============   ======   ======   =================   ===============   =================   ===============   ===============   =========
192.xxx.219.1     1        MA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.101   169.xxx.1.1       provo-red
192.xxx.219.2     2        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.102   169.xxx.1.2       sandy-red
192.xxx.219.3     3        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.103   169.xxx.1.3       orem-red
192.xxx.219.4     4        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.104   169.xxx.1.4       ogden-red
192.xxx.219.5     5        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.105   169.xxx.1.5       layton-red
192.xxx.219.6     6        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.106   169.xxx.1.6       logan-red
192.xxx.219.7     7        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.107   169.xxx.1.7       lehi-red
192.xxx.219.8     8        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.108   169.xxx.1.8       murray-red
Status:
M - Master, S - Slave
E - Epoxy
I - Initializing, U - Updating, A - Active
P - On, O - Off
! - Warning/Error list:
    1 -(W) Hostname set to default hostname set by installer


169.xxx.2.1      False   00:00:00:00:00:00   green        2         tucson-green.nanlocal
Node private      Node              Public                                BMC
Ip Address        Id       Status   Mac                 Ip Address        Mac                 Ip Address        Private.4(NAN)    Node Name
===============   ======   ======   =================   ===============   =================   ===============   ===============   =========
192.xxx.219.1     1        MA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.219.101   169.xxx.2.1       provo-green
192.xxx.219.2     2        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.102   169.xxx.2.2       sandy-green
192.xxx.219.3     3        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.103   169.xxx.2.3       orem-rgreen
192.xxx.219.4     4        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.104   169.xxx.2.4       ogden-green
192.xxx.219.5     5        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.105   169.xxx.2.5       layton-green
192.xxx.219.6     6        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.106   169.xxx.2.6       logan-green
192.xxx.219.7     7        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.107   169.xxx.2.7       lehi-green
192.xxx.219.8     8        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.108   169.xxx.2.8       murray-green
Status:
M - Master, S - Slave
E - Epoxy
I - Initializing, U - Updating, A - Active
P - On, O - Off
! - Warning/Error list:
    1 -(W) Hostname set to default hostname set by installer
  1. Voer de automatiseringsopdracht uit vanaf het controleknooppunt met xDoctor 4-8.104.0 en hoger.
 
Opmerking: --target-rack wordt ondersteund voor deze actie, is dit script opgenomen in de xDoctor4.8.104.0-release, die versie 3.0 van de Ansible Automation-scripts bevat.
 
Opdracht: 
# sudo xdoctor autopilot --kb 273244 --target-rack <rack color>
Voorbeeld: (Dit voorbeeld werkt op rack 1.) 
admin@ecsnode1:~> sudo xdoctor autopilot --kb 273244 --target-rack red

Using /etc/ansible/ansible.cfg as config file
VERSION: 3.0
Playbook tasks: 66
Role tasks: 28
Total tasks: 94 across 1 host(s)


Optie voor automatiseringsscript:

  1. Selecteer de optie die u wilt doen, Een NTP-server toevoegen aan de configuratie of Een NTP-server verwijderen uit de configuratie.
Voorbeeld: 
TASK [Ask user if they want to add or remove an NTP server] **************************************************************************************************************************************************
[Ask user if they want to add or remove an NTP server]
******************************************************************************
Please select one of the following options to add or remove an NTP server:
******************************************************************************
(1) Add an NTP server to the configuration.
(2) Remove an NTP server from the configuration.

(0) Exit
******************************************************************************
  1. Configuratie NTP-server wijzigen:
-> (1) Add an NTP server IP or FQDN

TASK [Ask for NTP server IP or FQDN if adding] ***************************************************************************************************************************************************************
[Ask for NTP server IP or FQDN if adding]
******************************************************************************
Enter the IP or FQDN of the NTP server:
******************************************************************************
:127.0.0.1

...

TASK [NTP server was successfully added or removed summary] **************************************************************************************************************************************************
ok: [169.xxx.1.6] => {
    "msg": [
        "*******************************************************************************",
        "*******************************************************************************",
        "The IP or FQDN address 127.0.0.1 was successfully added to the NTP server list.",
        "*******************************************************************************",
        "*******************************************************************************"
    ]
}
  1. Configuratie NTP-server wijzigen:
->(2) Remove an NTP server from the configuration.

TASK [Prompt user to select NTP server to remove] ************************************************************************************************************************************************************
[Prompt user to select NTP server to remove]
******************************************************************************
Enter the letter of the NTP server you want to remove:
******************************************************************************
(a) 127.0.0.1
(b) x.x.x.x

(0) Exit
******************************************************************************
(a)

ok: [169.xxx.1.6] => {
    "msg": [
        "*******************************************************************************",
        "*******************************************************************************",
        "127.0.0.1 was successfully removed from the NTP server list.",
        "*******************************************************************************",
        "*******************************************************************************"
    ]
}


IP's toevoegen aan NTP:

Voer de onderstaande opdracht eenmaal uit om het IP-adres van de NTP-server toe te voegen. Herhaal de opdracht voor elke NTP-server (of scheid met spatie).
Opdracht: 
# sudo setrackinfo -a NTPServer <NTP_Server_IP>
Voorbeeld: 
# sudo setrackinfo -a NTPServer 10.3.4.5

Controleer de resultaten met behulp van getrackinfo -r 
# getrackinfo -r
Rack Master Info
================
ChassisID = 00:01:02:63:1d:1e
RackID = 1
RackName = red
epoxy = False

Basic Config:
-------------
        EcsManagedBmc = no
        RackInstallServer = no

Network Config:
---------------
        DNSSearch =  corp.dell.com dell.com
        DNSServer =  x.x.x.x y.y.y.y
        NTPServer =  x.x.x.x

System Config:
--------------
        NANDomain = nan
        NANNetwork = 169.xxx.0.0/16
        NANVlan = 4
        PublicVlan = 1
        RackFirstNode = 1
        RackLastNode = 24
        RackNetwork = 192.xxx.xxx.0/24
        RackSwitchCommunityName = public
        RackVlan = 0


IP-adressen verwijderen uit NTP-configuratie:

Gebruik de onderstaande opdracht om een of meer NTP IP's te verwijderen:
Opdracht: 
# sudo setrackinfo -d NTPServer <NTP_Server_IP>
Voorbeeld: 
# sudo setrackinfo -d NTPServer 10.3.4.5

其他信息

Zie artikel ECS voor DNS-configuratie: Een DNS-server toevoegen of verwijderen.

受影响的产品

ECS Appliance

产品

ECS, ECS Appliance Gen 3, ECS Appliance Hardware Series, ECS Appliance Software with Encryption, ECS Appliance Software without Encryption
文章属性
文章编号: 000273244
文章类型: How To
上次修改时间: 14 8月 2025
版本:  6
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。