ECS: OBS: Como adicionar ou remover um servidor NTP

摘要: Este artigo mostra como modificar a configuração de NTP do ECS.

本文适用于 本文不适用于 本文并非针对某种特定的产品。 本文并非包含所有产品版本。
查看其他资源

说明

Nota importante: Um novo recurso foi lançado no xDoctor 4-8.104.0 e superior. Essa base de conhecimento (KB) agora é automatizada com o xDoctor para tentar adicionar ou remover rapidamente o servidor NTP. Se o script não conseguir adicionar ou remover o servidor NTP, ele fornecerá um resumo detalhado de suas descobertas.  
Para obter mais informações, consulte o artigo ECS ObjectScale: Como executar scripts de automação da KB (piloto automático) (pode ser necessário fazer login no Suporte Dell como um usuário registrado.)
 
  1. Para localizar o IP de NAN, você pode usar o IP identificado no alerta ou no getclusterinfo -i para o seu destino com este script.
Comando: 
# getclusterinfo -i
Exemplo: 
admin@ecsnode1:~> getclusterinfo -i

Registered Racks
================

Ip Address        epoxy   seg mac             seg color    seg id    NAN Hostname
===============   =====   =================   ==========   =======   ============
169.xxx.1.1      False   00:00:00:00:00:00   red          1         provo-red.nanlocal
Node private      Node              Public                                BMC
Ip Address        Id       Status   Mac                 Ip Address        Mac                 Ip Address        Private.4(NAN)    Node Name
===============   ======   ======   =================   ===============   =================   ===============   ===============   =========
192.xxx.219.1     1        MA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.101   169.xxx.1.1       provo-red
192.xxx.219.2     2        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.102   169.xxx.1.2       sandy-red
192.xxx.219.3     3        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.103   169.xxx.1.3       orem-red
192.xxx.219.4     4        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.104   169.xxx.1.4       ogden-red
192.xxx.219.5     5        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.105   169.xxx.1.5       layton-red
192.xxx.219.6     6        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.106   169.xxx.1.6       logan-red
192.xxx.219.7     7        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.107   169.xxx.1.7       lehi-red
192.xxx.219.8     8        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.108   169.xxx.1.8       murray-red
Status:
M - Master, S - Slave
E - Epoxy
I - Initializing, U - Updating, A - Active
P - On, O - Off
! - Warning/Error list:
    1 -(W) Hostname set to default hostname set by installer


169.xxx.2.1      False   00:00:00:00:00:00   green        2         tucson-green.nanlocal
Node private      Node              Public                                BMC
Ip Address        Id       Status   Mac                 Ip Address        Mac                 Ip Address        Private.4(NAN)    Node Name
===============   ======   ======   =================   ===============   =================   ===============   ===============   =========
192.xxx.219.1     1        MA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.219.101   169.xxx.2.1       provo-green
192.xxx.219.2     2        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.102   169.xxx.2.2       sandy-green
192.xxx.219.3     3        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.103   169.xxx.2.3       orem-rgreen
192.xxx.219.4     4        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.104   169.xxx.2.4       ogden-green
192.xxx.219.5     5        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.105   169.xxx.2.5       layton-green
192.xxx.219.6     6        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.106   169.xxx.2.6       logan-green
192.xxx.219.7     7        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.107   169.xxx.2.7       lehi-green
192.xxx.219.8     8        SA       00:00:00:00:00      0.0.0.0           00:00:00:00:00      192.xxx.xxx.108   169.xxx.2.8       murray-green
Status:
M - Master, S - Slave
E - Epoxy
I - Initializing, U - Updating, A - Active
P - On, O - Off
! - Warning/Error list:
    1 -(W) Hostname set to default hostname set by installer
  1. Execute o comando de automação a partir do nó de controle com o xDoctor 4-8.104.0 e posterior.
 
Nota: --target-rack é compatível com essa ação. Esse script foi incluído na versão xDoctor4.8.104.0, que apresenta a versão 3.0 dos scripts de automação do Ansible.
 
Comando: 
# sudo xdoctor autopilot --kb 273244 --target-rack <rack color>
Exemplo: (Este exemplo está funcionando no rack 1.) 
admin@ecsnode1:~> sudo xdoctor autopilot --kb 273244 --target-rack red

Using /etc/ansible/ansible.cfg as config file
VERSION: 3.0
Playbook tasks: 66
Role tasks: 28
Total tasks: 94 across 1 host(s)


Opção de script de automação:

  1. Selecione a opção desejada, Adicionar um servidor NTP à configuração ou Remover um servidor NTP da configuração.
Exemplo: 
TASK [Ask user if they want to add or remove an NTP server] **************************************************************************************************************************************************
[Ask user if they want to add or remove an NTP server]
******************************************************************************
Please select one of the following options to add or remove an NTP server:
******************************************************************************
(1) Add an NTP server to the configuration.
(2) Remove an NTP server from the configuration.

(0) Exit
******************************************************************************
  1. Altere a configuração do servidor NTP:
-> (1) Add an NTP server IP or FQDN

TASK [Ask for NTP server IP or FQDN if adding] ***************************************************************************************************************************************************************
[Ask for NTP server IP or FQDN if adding]
******************************************************************************
Enter the IP or FQDN of the NTP server:
******************************************************************************
:127.0.0.1

...

TASK [NTP server was successfully added or removed summary] **************************************************************************************************************************************************
ok: [169.xxx.1.6] => {
    "msg": [
        "*******************************************************************************",
        "*******************************************************************************",
        "The IP or FQDN address 127.0.0.1 was successfully added to the NTP server list.",
        "*******************************************************************************",
        "*******************************************************************************"
    ]
}
  1. Altere a configuração do servidor NTP:
->(2) Remove an NTP server from the configuration.

TASK [Prompt user to select NTP server to remove] ************************************************************************************************************************************************************
[Prompt user to select NTP server to remove]
******************************************************************************
Enter the letter of the NTP server you want to remove:
******************************************************************************
(a) 127.0.0.1
(b) x.x.x.x

(0) Exit
******************************************************************************
(a)

ok: [169.xxx.1.6] => {
    "msg": [
        "*******************************************************************************",
        "*******************************************************************************",
        "127.0.0.1 was successfully removed from the NTP server list.",
        "*******************************************************************************",
        "*******************************************************************************"
    ]
}


Como adicionar IPs ao NTP:

Execute o comando abaixo uma vez para que o IP do servidor NTP seja adicionado. Repita o comando para cada servidor NTP (ou separe com espaço).
Comando: 
# sudo setrackinfo -a NTPServer <NTP_Server_IP>
Exemplo: 
# sudo setrackinfo -a NTPServer 10.3.4.5

Verifique os resultados usando getrackinfo -r 
# getrackinfo -r
Rack Master Info
================
ChassisID = 00:01:02:63:1d:1e
RackID = 1
RackName = red
epoxy = False

Basic Config:
-------------
        EcsManagedBmc = no
        RackInstallServer = no

Network Config:
---------------
        DNSSearch =  corp.dell.com dell.com
        DNSServer =  x.x.x.x y.y.y.y
        NTPServer =  x.x.x.x

System Config:
--------------
        NANDomain = nan
        NANNetwork = 169.xxx.0.0/16
        NANVlan = 4
        PublicVlan = 1
        RackFirstNode = 1
        RackLastNode = 24
        RackNetwork = 192.xxx.xxx.0/24
        RackSwitchCommunityName = public
        RackVlan = 0


Como remover IPs da configuração do NTP:

Use o comando abaixo para remover um ou mais IPs NTP:
Comando: 
# sudo setrackinfo -d NTPServer <NTP_Server_IP>
Exemplo: 
# sudo setrackinfo -d NTPServer 10.3.4.5

其他信息

Para configuração do DNS, consulte o artigo ECS: Como adicionar ou remover um servidor DNS.

受影响的产品

ECS Appliance

产品

ECS, ECS Appliance Gen 3, ECS Appliance Hardware Series, ECS Appliance Software with Encryption, ECS Appliance Software without Encryption
文章属性
文章编号: 000273244
文章类型: How To
上次修改时间: 14 8月 2025
版本:  6
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。