Connectrix: Cisco: show running-config diff yükseltmeden sonra farkı gösteriyor
摘要: NX-API etkinken anahtar 8.4 (2a) sürümünden 9.4 e (2a) yükseltildikten sonra, başlangıç yapılandırmasında ek satır gözlemlendi: "nxapi trustpoint ?". Bu satır, çalışan yapılandırmada mevcut değil. ...
本文适用于
本文不适用于
本文并非针对某种特定的产品。
本文并非包含所有产品版本。
症状
Yürütme "copy running-config startup-config" Kopyalama işlemi denendikten sonra da tutarsızlık devam ettiği için komut sorunu çözmüyor.
Bu, Cisco Bug ID CSCwo14155'in bir parçasıdır.
`show running-config` feature nxapi nxapi http port 8080 `show startup-config` feature nxapi nxapi http port 8080
9.4 (2a) sürümüne yükseltme sonrası
`show running-config` feature nxapi nxapi http port 8080 nxapi ssl protocols TLSv1.1 TLSv1.2 `show startup-config` feature nxapi nxapi http port 8080 nxapi ssl protocols TLSv1.1 TLSv1.2 nxapi trustpoint ? <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< switch# show run diff *** Startup-config --- Running-config *************** *** 3411,3421 **** - nxapi trustpoint <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< (-) --- 3411,3420 ---- switch# copy r s [########################################] 100% Copy complete. switch# switch# sh running-config diff *** Startup-config --- Running-config *************** *** 3384,3394 **** - nxapi trustpoint <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< (-) --- 3384,3393 ---- - No Trustpoint configured on switch switch# sh crypto ca trustpoint
原因
Bu, 8.4(2a)'dan 9.4'e (2a) yükseltme sırasında yalnızca MDS-9706 da görülen kozmetik bir hatadır.
解决方案
Geçici Çözüm:
NXAPI özelliğinin devre dışı bırakılması ve etkinleştirilmesi sorunu çözer. Söz dizimi aşağıdadır:
#no feature nxapi #copy r s #sh run diff #feature nxapi # nxapi http port 8080 #nxapi ssl protocols TLSv1.1 TLSv1.2 #copy r s #sh run diff
NOT: Bunlar kesintiye neden olmayan komutlardır.
Cisco Geliştirme ekibinden kalıcı düzeltme bekleniyor.
受影响的产品
Connectrix MDS-9706, Connectrix MDS-9706-V2文章属性
文章编号: 000289851
文章类型: Solution
上次修改时间: 27 2月 2025
版本: 1
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。