PowerStore: After an Upgrade of PowerStore to 2.0.x.x or 2.1.x.x, Volumes are Inaccessible to Direct Attached FC Hosts

摘要: After an upgrade of PowerStore to 2.0.x.x or 2.1.x.x, direct attached hosts which have NVMe capable drivers may lose access to all volumes.

本文章適用於 本文章不適用於 本文無關於任何特定產品。 本文未識別所有產品版本。

症狀

A host may lose access to volumes after PowerStore upgrade to the affected version.

Alternatively, if PowerStore was previously upgraded to the affected version without any issues, updating the host drivers to a version supporting NVMe exposes this issue.

原因

After the hosts are updated to support NVMe, a second process login (PRLI) can occur from the host following each link up event. This second PRLI is for NVMe transport, and the PowerStore does not handle this second PRLI optimally.

解析度

This issue is addressed in PowerStoreOS v3.

Workaround:
Disable NVMe support in the driver.
  • For ESXi hosts, see VMware article 84325 This hyperlink is taking you to a website outside of Dell Technologies.. Summary of VMware article is below: 
ESXi using QLogic or Marvel HBA and qlnativefc driver:
esxcfg-module -s 'ql2xnvmesupport=0' qlnativefc
 
ESXi using Emulex HBA and lpfc driver:
esxcli system module parameters set -m lpfc -p lpfc_enable_fc4_type=1
  • For Red Hat hosts, see Red Hat article 3522911 This hyperlink is taking you to a website outside of Dell Technologies.. Summary of Red Hat article is below: 
Linux hosts using QLogic or Marvel HBA and qlnativefc driver, add or edit the line below:
vi /etc/modprobe.d/qla2xxx.conf
ql2xnvmeenable=0
 
Linux hosts using Emulex HBA and lpfc driver, edit the following file and add or edit the line below:
vi /etc/modprobe.d/lpfc.conf
 lpfc lpfc_enable_fc4_type=1
 
NOTE: The hosts must be rebooted after changing the HBA driver configuration.

受影響的產品

PowerStore 1000X, PowerStore 1000T, PowerStore 3000X, PowerStore 3000T, PowerStore 5000X, PowerStore 5000T, PowerStore 500T, PowerStore 7000X, PowerStore 7000T, PowerStore 9000X, PowerStore 9000T
文章屬性
文章編號: 000200588
文章類型: Solution
上次修改時間: 14 6月 2023
版本:  14
向其他 Dell 使用者尋求您問題的答案
支援服務
檢查您的裝置是否在支援服務的涵蓋範圍內。