Connectrix B-Series: After Upgrading to Fabric OS 9.1.1c, Inline Commands with the Use of "fosexec" Command Return an Error

摘要: After upgrading to Fabric OS (FOS) 9.1.1c, unable to run inline commands from UNIX or Linux server to the switch with the "fosexec" commands.

本文章適用於 本文章不適用於 本文無關於任何特定產品。 本文未識別所有產品版本。
查看其他資源

症狀

Environment:

Fabric OS 9.1.1c

Issue:

The outputs show errors when running an inline command from a UNIX or Linux server. The command stops responding when probing a different logical Switch FID on the same chassis. Example:

[hosttest@VM1234 ~]$
[hosttest@VM1234 ~]$ ssh aa.bb.cc.dd fosexec --fid 44 -cmd 'firmwareshow'
hosttest@aa.bb.cc.dd's password:
/bin/stty: 'standard input': Inappropriate ioctl for device
/bin/stty: 'standard input': Inappropriate ioctl for device
/etc/ssh_inline_profile: line 25: FUNCNEST: readonly variable
Appl     Primary/Secondary Versions
------------------------------------------
FOS      v9.1.1c
         v9.1.1c
---------------------------------------------------

"firmwareshow" on FID 44:

[hosttest@VM3198 ~]$

原因

This issue was found during internal testing. A change in the error was found when upgrade to FOS 9.2.0a was done.

Error: 
[hosttest@VM3198 ~]$
[hosttest@VM3198 ~]$ ssh aa.bb.cc.dd fosexec --fid 44 -cmd 'firmwareshow'
hosttest@10.60.23.25's password:
/bin/stty: 'standard input': Inappropriate ioctl for device
/bin/stty: 'standard input': Inappropriate ioctl for device
Appl     Primary/Secondary Versions
------------------------------------------
FOS      v9.2.0a
         v9.2.0a
---------------------------------------------------

"firmwareshow" on FID 44:

[hosttest@VM3198 ~]$

解析度

Resolution:

Upgrade to Fabric OS 9.2.0b or later.

Workaround:

Run the commands directly on the switch.

受影響的產品

Connectrix, Connectrix B-Series

產品

Connectrix B-Series Fabric OS 9.X
文章屬性
文章編號: 000218645
文章類型: Solution
上次修改時間: 29 7月 2025
版本:  4
向其他 Dell 使用者尋求您問題的答案
支援服務
檢查您的裝置是否在支援服務的涵蓋範圍內。