Avamar: The hard limit (quota) may not be enforced for backups which complete quickly

摘要: The Avamar hard limit (quota) may not be enforced for backups which complete quickly.

本文章適用於 本文章不適用於 本文無關於任何特定產品。 本文未識別所有產品版本。
查看其他資源

症狀

Some client backups complete successfully even after exceeding the Hard Limit (quota) set.

Ideally, a client backup setup with a "hard limit" will cancel and fail the backup activity with Hard limit exceeded, and set the hard_limit_exceeded column in the Activity Report to True.

 

kA2j0000000QXeXCAW_3_0
  
session_id       | cid                                      | hard_limit_exceeded 
9138687480008009 | 7a233df16d6a9f50e612ffaccbe5e9c9fd761bbb | t 
9138696120009409 | 7a233df16d6a9f50e612ffaccbe5e9c9fd761bbb | f 
9138704760006009 | 7a233df16d6a9f50e612ffaccbe5e9c9fd761bbb | f 
9138713400008409 | 7a233df16d6a9f50e612ffaccbe5e9c9fd761bbb | f 
9138722040008509 | 7a233df16d6a9f50e612ffaccbe5e9c9fd761bbb | f 
9138686689884609 | 7a233df16d6a9f50e612ffaccbe5e9c9fd761bbb | t

原因

The client backup finished within 30 seconds.

解析度

The way that the "hard limit" feature works is as follows:
1. The client sends session progress information to the GSAN persistent store every 30 seconds. The total bytes scanned are included in the session progress data.
2. The Management Console Server (MCS) polls the GSAN persistent store (using the "avmaint getclientmsgs" command) approximately once every 30 seconds.
3. From the output of the "avmaint getclientmsgs" command, the MCS determines if the "total bytes scanned" has exceeded the hard backup dataset limit threshold.
4. If the total bytes scanned are greater than the hard backup dataset limit threshold, then the MCS generates a cancellation work order and marks the backup as "hard_limit_exceeded".
5. Even if the backup completes before the MCS can check the limit and cancel the backup, the MCS still marks the backup as "hard_limit_exceeded".
 
Note: If a backup with a hard limit set completes within 30 seconds, it will complete successfully as the first polling happens after 30 seconds. However, it is still marked in the database (or the Activity Report tab in Admin UI) for "hard_limit_exceeded" as "true":
 

kA2j0000000QXeXCAW_2_0

其他資訊

See the following article: Avamar: How to identify which Avamar clients have breached the backup soft and hard limits

受影響的產品

Avamar

產品

Avamar
文章屬性
文章編號: 000039291
文章類型: Solution
上次修改時間: 06 10月 2025
版本:  9
向其他 Dell 使用者尋求您問題的答案
支援服務
檢查您的裝置是否在支援服務的涵蓋範圍內。