Cannot uninstall PowerPath on Sun Solaris host error = device is busy
摘要: Cannot uninstall PowerPath on Sun Solaris host error = device is busy
本文章適用於
本文章不適用於
本文無關於任何特定產品。
本文未識別所有產品版本。
症狀
pkgrm EMCpower
Cannot uninstall PowerPath on Sun Solaris host error = device is busy
pkgrm failed to inistall PowerPath on Sun Solaris
Error Power Path Pseudos busy or mounted. Stop all I/Os and make sure all volumes are not mounted, then retry removing the package.
Cannot uninstall PowerPath on Sun Solaris host error = device is busy
pkgrm failed to inistall PowerPath on Sun Solaris
Error Power Path Pseudos busy or mounted. Stop all I/Os and make sure all volumes are not mounted, then retry removing the package.
原因
----------------------------------------------------------------
* EMCpower Removal:
* Error: PowerPath pseudo(s) still in-use, busy or mounted.
* Please stop all I/Os and make sure all volumes are
* not mounted then retry removing the package.
----------------------------------------------------------------
pkgrm: ERROR: preremove script did not complete successfully
Removal of <EMCpower> failed.
* EMCpower Removal:
* Error: PowerPath pseudo(s) still in-use, busy or mounted.
* Please stop all I/Os and make sure all volumes are
* not mounted then retry removing the package.
----------------------------------------------------------------
pkgrm: ERROR: preremove script did not complete successfully
Removal of <EMCpower> failed.
解析度
1.
Check if the pseud devices are still mounted. If so umount them and try the uninstall of PowerPath..
If still the issue there -
2.
Check with "fuser -c <pseudo device>" and 'fuser -ck <pseudo device>" and try the uninstall of PowerPath..
If still the issue there -
3.
If above 2 will not work, reboot the system to single user non cluster mode and try the uninstall of PowerPath.
If still the issue there -
4.
If still got the same "device busy error", please open the /etc/ system file and change line to "set emcp:bPxEnableInit=0" and reboot the host back in single suer mode. The value "0" will ensure in reboot PowerPath emcp modules will not be loaded (modinfo | grep -i emcp).
After the host come up try the unistall of PowerPath.
Check if the pseud devices are still mounted. If so umount them and try the uninstall of PowerPath..
If still the issue there -
2.
Check with "fuser -c <pseudo device>" and 'fuser -ck <pseudo device>" and try the uninstall of PowerPath..
If still the issue there -
3.
If above 2 will not work, reboot the system to single user non cluster mode and try the uninstall of PowerPath.
If still the issue there -
4.
If still got the same "device busy error", please open the /etc/ system file and change line to "set emcp:bPxEnableInit=0" and reboot the host back in single suer mode. The value "0" will ensure in reboot PowerPath emcp modules will not be loaded (modinfo | grep -i emcp).
After the host come up try the unistall of PowerPath.
其他資訊
Before editing the /etc/system file please have a copy of the original file.
受影響的產品
PowerPath for Solaris產品
PowerPath for Solaris文章屬性
文章編號: 000064215
文章類型: Solution
上次修改時間: 14 8月 2025
版本: 5
向其他 Dell 使用者尋求您問題的答案
支援服務
檢查您的裝置是否在支援服務的涵蓋範圍內。