Replacing disks in SC Series via the Dell Storage Manager Client

摘要: Replacing disks in SC Series via the Dell Storage Manager Client.

本文章適用於 本文章不適用於 本文無關於任何特定產品。 本文未識別所有產品版本。
查看其他資源

說明

Replacing disks in Storage via the Dell Storage Manager Client:

  1. In the DSM select the "Hardware" tab
  2. Expand the section on the left side, and go to the drawer with the failed disk
  3. Click the "Disks" section
  4. On the right side of the screen right-click on the failed disk and choose the "Replace Disk" option:
    HOW17135_en_US__1HOW17135-1
  5. The failed disk replacement process will start as indicated below, click on "Next":
    HOW17135_en_US__2HOW17135-2
  6. Follow the instructions to physically remove and after removing the failed disk and click "Next":
    HOW17135_en_US__3HOW17135-3
  7. Insert the new disk into the enclosure and click "Next":
    HOW17135_en_US__4HOW17135-4
  8. The Storage will recognize the new disk. This step may take 2 to 5 minutes, wait:
    HOW17135_en_US__5HOW17135-5
  9. If the disk was successfully recognized by the Storage the confirmation below will appear and you can click "Finish" to complete this activity:
    HOW17135_en_US__6HOW17135-6
  10. After of the replacement of the disk, send new logs through Support Assist. If you need help with the process follow this link

受影響的產品

Compellent (SC, SCv & FS Series), Dell Compellent SC4020, Dell Storage SC8000, Dell Storage SCv2000, Dell Storage SCv2020, Dell Storage SCv2080, Dell Storage SC5020, Dell Storage SC5020F, Dell Storage SC7020, Dell Storage SC7020F, Dell Storage SC9000 , Dell Storage SCv3000, Dell Storage SCv3020 ...
文章屬性
文章編號: 000117921
文章類型: How To
上次修改時間: 25 2月 2021
版本:  4
向其他 Dell 使用者尋求您問題的答案
支援服務
檢查您的裝置是否在支援服務的涵蓋範圍內。