Importing MDT boot images into Windows Deployment Services

摘要: Import Microsoft Deployment Toolkit (MDT) boot image to use with Windows Deployment Services (WDS).

本文章適用於 本文章不適用於 本文無關於任何特定產品。 本文未識別所有產品版本。
查看其他資源

症狀

 

原因

 

解析度

Follow the steps below to import Microsoft Deployment Toolkit (MDT) boot images into Windows Deployment Services (WDS).

NOTE: A working knowledge of both Microsoft Deployment Toolkit and Windows Deployment Services is recommended to use this article.

Windows Deployment Services (WDS) update.

When a boot image (with updated drivers for example) is updated in MDT, it does not update WDS automatically.

How to import the boot image

  1. Supply the correct drivers in MDT:

    SLN304283_en_US__2MDT-Import-1
     
  2. Update the Deployment Share

    SLN304283_en_US__3MDT-Import-2
     
  3. Go to Windows Deployment Services, Boot Images
  4. Go to Add Boot Image (LiteTouchPE_x64.wim) if Lite Touch Windows PE x64 is not already present in WDS:
    • If Lite Touch Windows PE (x64) is already in WDS Boot Images, right click on the image and choose Replace Image (and then select the location of LiteTouchPE_x64.wim).

      SLN304283_en_US__4MDT-Import-3

      SLN304283_en_US__5MDT-Import-4
文章屬性
文章編號: 000134992
文章類型: Solution
上次修改時間: 06 5月 2021
版本:  3
向其他 Dell 使用者尋求您問題的答案
支援服務
檢查您的裝置是否在支援服務的涵蓋範圍內。