MD Series: Firmware update on MD3060e when attached to MD3xxx.
摘要: How to update the Firmware of a MD3060e, when attached to MD3xxx.
本文章適用於
本文章不適用於
本文無關於任何特定產品。
本文未識別所有產品版本。
症狀
Please Note before Update:
- Do a backup of your data!
- The process of the update could take up to 30 minutes and both EMMs will be restarted.
- For the update, the primary storage has to be in the Optimal state.
- We recommend to do the Update during Downtime, because the IO to the expansion enclosures will be stopped during the update.
- Check the compatibility-guide of your software-/OS-vendor if the Firmware is approved.
原因
-
解析度
1. Download the needed Firmware of the MD3060e from the Dell webpage or the FTP.
- MD3060e - Webpage
2. Extract the downloaded controller-firmware.
3. Be sure that the current Firmware is installed to the Main Chassis.
4. Update the firmware as follows:
3. Be sure that the current Firmware is installed to the Main Chassis.
4. Update the firmware as follows:
1. Open the Modular Disk Storage Manager (MDSM) and connect to the primary chassis you want to update.
2. Choose the Update menu.
3. Now choose EMM-Firmware...
This Menu is only shown if one or more MD3060e are attached.
4. Choose all the Enclosures you want to update from the shown list. If you want to update all attached expansion enclosures you can also mark the checkbox Select All.
5. Now click Select File and choose the File with the Ending *.bin.
6. If you click the Start-Button you will begin the Update.
受影響的產品
Dell PowerVault OEM Ready MD34XX and MD38XX, PowerVault MD3060e, PowerVault MD3260, PowerVault MD3260i, PowerVault MD3460, PowerVault MD3660f, PowerVault MD3860f, PowerVault MD3860i文章屬性
文章編號: 000177922
文章類型: Solution
上次修改時間: 03 11月 2022
版本: 7
向其他 Dell 使用者尋求您問題的答案
支援服務
檢查您的裝置是否在支援服務的涵蓋範圍內。