Dell EMC PowerEdge MX Networking SmartFabric Deployment How to Create the SmartFabric

摘要: How to create the SmartFabric in the Dell EMC PowerEdge MX Networking SmartFabric infrastructure.

本文章適用於 本文章不適用於 本文無關於任何特定產品。 本文未識別所有產品版本。
查看其他資源

說明

Create the SmartFabric

 
To create a SmartFabric using the OME-M console, perform the following steps:
 
Steps

1. Open the OME-M console.
2. From the navigation menu, click Devices > Fabric.
3. In the Fabric pane, click Add Fabric.
4. In the Create Fabric window, complete the following:
a. Enter a name for the fabric in the Name box. In this example, SmartFabric was entered.
b. Optionally, enter a description in the Description box. In this example, the description SmartFabric using MX9116n/MX7116n in Fabric A was entered.
c. Click Next.
d. From the Design Type list, select the appropriate type. In this example, 2x MX9116n Fabric Switching Engine in different chassis was selected.
e. From the Chassis-X list, select the first MX7000 chassis.
f. From the Switch-A list, select Slot-IOM-A1.
g. From the Chassis-Y list, select the second MX7000 chassis to join the fabric.
h. From the Switch-B list, select Slot-IOM-A2.
i. Click Next.
j. On the Summary page, verify the proposed configuration and click Finish.
 
NOTE: From the Summary window, a list of the physical cabling requirements can be printed.


image.png



The SmartFabric deploys. The process of Fabric creation can take up to 20 minutes to complete. During this time, all related switches are rebooted, and the operating mode changes from Full Switch to SmartFabric mode.
 
NOTE: After the fabric is created, the fabric health is critical until at least one uplink is created.


The figure below shows the new SmartFabric object and some basic information about the fabric.

image.png


For more details, see the SmartFabric Creation section of the Dell EMC PowerEdge MX Networking Deployment Guide 

See this list below of related articles in this series with embedded how to videos:

Dell EMC PowerEdge MX Networking SmartFabric Deployment How to Define VLANs
Dell EMC PowerEdge MX Networking SmartFabric Deployment How to Configure Port Breakout
Dell EMC PowerEdge MX Networking SmartFabric Deployment How to Create an Uplink
Dell EMC PowerEdge MX Networking SmartFabric Deployment How to Create Identity Pools
Dell EMC PowerEdge MX Networking SmartFabric Deployment How to Deploy a Template
Dell EMC PowerEdge MX Networking SmartFabric Deployment How to Create Fibre Channel Uplinks

受影響的產品

MX Series, Dell EMC Networking MX5108n, Dell EMC Networking MX7116n, Dell EMC Networking MX9116n, PowerEdge MX7000
文章屬性
文章編號: 000192281
文章類型: How To
上次修改時間: 05 6月 2025
版本:  7
向其他 Dell 使用者尋求您問題的答案
支援服務
檢查您的裝置是否在支援服務的涵蓋範圍內。