PowerEdge MX Networking SmartFabric Deployment Configure Port Breakout

Configure Uplink Port Speed or Breakout

NOTE: Users should only perform this task if needed.

If the uplink ports must be reconfigured to a different speed or breakout setting from the default, you must complete this before creating the uplink.

To configure the Ethernet breakout on port groups using OME-M Console, perform the following steps:

Steps

1. Open the OME-M console.
2. From the navigation menu, click Devices > I/O Modules.
3. Select the switch that you want to manage. In this example, an MX9116n FSE in slot IOM-A1 is selected.
4. Choose Hardware > Port Information.
5. In the Port Information pane, choose the wanted port group. In this example, port-group1/1/13 is selected.
6. Select Configure Breakout. In the Configure Breakout dialog box, select the required Breakout option. In the example, the Breakout Type for port-group1/1/13, 1x 40GE was used.

NOTE: Before choosing the breakout type, you must set the Breakout Type to HardwareDefault and then set the wanted configuration. If the wanted breakout type is selected before setting HardwareDefault, an error occurs.

7. Click Finish.
8. Configure the remaining breakout types on additional uplink port groups as needed.



See this video below on How to Configure Port Breakout

Related Content

For more details, see the Configure Uplink Port Speed or Breakout section of the Dell EMC PowerEdge MX Networking Deployment Guide 

See this list below of related articles in this series with embedded how to videos:

Dell EMC PowerEdge MX Networking SmartFabric Deployment How to Create the SmartFabric
Dell EMC PowerEdge MX Networking SmartFabric Deployment How to Define VLANs
Dell EMC PowerEdge MX Networking SmartFabric Deployment How to Configure Port Breakout
Dell EMC PowerEdge MX Networking SmartFabric Deployment How to Create an Uplink  
Dell EMC PowerEdge MX Networking SmartFabric Deployment How to Create Identity Pools
Dell EMC PowerEdge MX Networking SmartFabric Deployment How to Deploy a Template
Dell EMC PowerEdge MX Networking SmartFabric Deployment How to Create Fibre Channel Uplinks