Dell Unity: Operation failed. Error code: 0x1000100 received when using Unisphere Client CLI (User Correctable)
摘要: This article describes one of the causes of the 0x1000100 error that results from the uemcli command.
本文章適用於
本文章不適用於
本文無關於任何特定產品。
本文未識別所有產品版本。
症狀
Uemcli commands run from the Unisphere Client result in the following error:
The same command run by the service user on the Unity SP CLI is successful.
TLS mode is changed from the default.
Default:
Current:
C:\Program Files (x86)\EMC\Unisphere CLI>uemcli -no -d xx.xx.xx.xx -u admin -securePassword -sslpolicy accept /sys/general show Password: Operation failed. Error code: 0x1000100 Unable to validate the specified certificate. (Error Code:0x1000100)
The same command run by the service user on the Unity SP CLI is successful.
TLS mode is changed from the default.
Default:
# uemcli -no -u admin -securePassword /sys/security show Password: 1: FIPS 140 mode = disabled TLS mode = TLSv1.0 and above Restricted shell mode = enabled
Current:
# uemcli -no -u admin -securePassword /sys/security show Password: 1: FIPS 140 mode = disabled TLS mode = TLSv1.2 and above Restricted shell mode = enabled
原因
This event occurs when using an older version of Unisphere Client.
Unisphere CLI client version 5.0.2 and earlier do not support TLS 1.2.
When using Unisphere CLI client version 5.0.2 and earlier, the Unisphere CLI clients cannot connect with Unity if TLS 1.1 is disabled.
You must install Unisphere CLI client version 5.0.3 or newer to connect with Unity using TLS 1.2 and above.
C:\Program Files (x86)\EMC\Unisphere CLI>uemcli -version Version: 4.5.1.577842 Branch: Unity_PullRequest_Build_Driver_RTM Revision: 235
Unisphere CLI client version 5.0.2 and earlier do not support TLS 1.2.
When using Unisphere CLI client version 5.0.2 and earlier, the Unisphere CLI clients cannot connect with Unity if TLS 1.1 is disabled.
You must install Unisphere CLI client version 5.0.3 or newer to connect with Unity using TLS 1.2 and above.
解析度
Install Unisphere Client 5.0.3 or above.
受影響的產品
Dell EMC Unity, Dell EMC Unity 300F, Dell EMC Unity 350F, Dell EMC Unity 400, Dell EMC Unity 400F, Dell EMC Unity 450F, Dell EMC Unity 500, Dell EMC Unity 500F, Dell EMC Unity 550F, Dell EMC Unity 600產品
Dell Unity 450F DC, Dell Unity 300, Dell EMC Unity XT 380, Dell EMC Unity XT 380F, Dell EMC Unity XT 480, Dell EMC Unity XT 480F, Dell EMC Unity 600F, Dell EMC Unity 650F, Dell EMC Unity XT 680, Dell EMC Unity XT 680F, Dell EMC Unity XT 880
, Dell EMC Unity XT 880F, Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family, Dell EMC Unity Hybrid, Dell EMC UnityVSA Professional Edition/Unity Cloud Edition
...
文章屬性
文章編號: 000216071
文章類型: Solution
上次修改時間: 26 10月 2023
版本: 4
向其他 Dell 使用者尋求您問題的答案
支援服務
檢查您的裝置是否在支援服務的涵蓋範圍內。