VxRail: Unable to Deploy OVF When an HTTPS Proxy is Configured

摘要: Unable to deploy OVF when an HTTPS proxy is configured.

本文章適用於 本文章不適用於 本文無關於任何特定產品。 本文未識別所有產品版本。
查看其他資源

症狀

Errors similar to the following are seen in /var/log/vmware/vpxd.log: 
Unrecognized SSL message, plaintext connection?, note that HTTP/s proxy is configured for the transfer
2020-09-16T14:41:59.004+02:00 info vpxd[14866] [Originator@6876 sub=Default opID=2b691553-01] [VpxLRO] -- ERROR task-1978410 -- UPSA913s-x64-VM01-noV
APP -- ResourcePool.ImportVAppLRO: vim.fault.OvfImportFailed:
--> Result:
--> (vim.fault.OvfImportFailed) {
-->  faultCause = (vmodl.fault.SystemError) {
-->   faultCause = (vmodl.MethodFault) null,
-->   faultMessage = (vmodl.LocalizableMessage) [
-->     (vmodl.LocalizableMessage) {
-->      key = "com.vmware.ovfs.ovfs-main.ovfs.transfer_failed",
-->      arg = (vmodl.KeyAnyValue) [
-->        (vmodl.KeyAnyValue) {
-->         key = "0",
-->         value = "Invalid response code: 403, note that HTTP/s proxy is configured for the transfer"
-->      message = "Transfer failed: Invalid response code: 403, note that HTTP/s proxy is configured for the transfer."
-->   reason = ""
-->   msg = "Transfer failed: Invalid response code: 403, note that HTTP/s proxy is configured for the transfer."
-->  faultMessage = <unset>

原因

The OVF deployment process is unable to connect to the proxy server with the error:  
Transfer failed: Invalid response code: 403, note that HTTP/s proxy is configured for the transfer.
This "Invalid response code: 403" is a response from the PROXY server indicating that the destination resource is not allowed access. 

The OVF transfer requires an HTTPS capable proxy when a proxy is in use. Ensure that the proxy is HTTPS capable or use the workarounds below to bypass the proxy.

解析度

  1. Work around this issue by using one of the two methods below. The following is case-sensitive:
  • Modify the HTTPS PROXY configuration to use HTTP:
  1. Modify the /etc/sysconfig/proxy file. Change the HTTPS_PROXY line to update the value from https to http:
From:
HTTPS_PROXY="https://proxy.domain.tld:3128/"

To:
HTTPS_PROXY="http://proxy.domain.tld:3128/"
  1. If the FQDN of the proxy server does not work, alternatively use its IP address.
  2. Reboot the VCSA if you are on a version prior to 7.0 U1. Otherwise, Restart services with the command:
# service-control --stop --all && service-control --start --all
  • Add the hosts to the NO_PROXY config to bypass the proxy:
  1. Use an SSH session to Connect to the vCenter Server.
  2. Modify the /etc/sysconfig/proxy file. Add the ESXi host FQDNs or IPs to the following line, separated by a comma followed by a space character. For Example:
NO_PROXY="localhost, 127.0.0.1, ESXi-01.test.com"
  1. Attempt the OVF deployment from the content library and the vSphere Client.

受影響的產品

VMWare Cloud on Dell EMC VxRail E560F, VMWare Cloud on Dell EMC VxRail E560N, VxRail Appliance Family, VxRail Appliance Series, VxRail G Series Nodes, VxRail D Series Nodes, VxRail E Series Nodes, VxRail P Series Nodes, VxRail S Series Nodes , VxRail Software ...

產品

XC Core Systems, XC Series Appliances, VxRail V Series Nodes, VxRail VD Series Nodes
文章屬性
文章編號: 000216499
文章類型: Solution
上次修改時間: 19 8月 2023
版本:  2
向其他 Dell 使用者尋求您問題的答案
支援服務
檢查您的裝置是否在支援服務的涵蓋範圍內。