PowerEdge：使用 PERCCLI 管理 PowerEdge RAID 控制器

使用 PERCCLI 管理 PERC 控制器

虛擬磁碟 （VD） 管理

使用以下命令控制一致性檢查、保留的快取和虛擬磁碟：

• 暫停一致性檢查
• 恢復一致性檢查
• 顯示一致性檢查狀態
• 啟動一致性檢查
• 停止一致性檢查
• 刪除保留的快取
• 顯示保留的快取
• 刪除虛擬磁碟
• 建立虛擬磁碟

# Pause consistency check
perccli /cX/vY pause cc

# Resume consistency check
perccli /cX/vY resume cc

# Show consistency check status
perccli /cX/vY show cc

# Start consistency check (add "force" if required)
perccli /cX/vY start cc [force]

# Stop consistency check
perccli /cX/vY stop cc

# Delete preserved cache (add "force" if required)
perccli /cX/vY delete preservedCache [force]

# Show preserved cache
perccli /cX show preservedCache

# Delete a virtual disk (use "all" to delete all VDs)
perccli /cX/vY|all del

# Create a virtual disk (example)
perccli /cX add vd r5 size=500GB name=VD1 drives=1:0-3 pdperarray=4 pdcache=on wt wb strip=128 force

實體磁碟管理

使用下列命令來檢視、設定、尋找及指派實體磁碟的熱備援。

• 顯示磁碟機資訊
• 設定磁碟機狀態 （JBOD、良好、離線、線上）
• 啟動/停止驅動器定位 LED
• 新增或刪除熱備援磁碟機
• 管理外部組態

# Show a specific drive (controller X, enclosure Y, slot Z)
perccli /cX/eY/sZ show

# Show all drives on a controller
perccli /cX/eall/sall show

# Show all drives with detailed information
perccli /cX/eY/sZ|sall show all

# Show drives in JBOD mode
perccli /cX/eY/sall show jbod
perccli /cX/eY/sZ show jbod

# Set a drive to JBOD
perccli /cX/eY/sZ set jbod

# Set a drive to GOOD (add "force" if required)
perccli /cX/eY/sZ set good [force]

# Set a drive OFFLINE
perccli /cX/eY/sZ set offline

# Set a drive ONLINE
perccli /cX/eY/sZ set online

# Start locate LED on a drive
perccli /cX/eY/sZ start locate

# Stop locate LED on a drive
perccli /cX/eY/sZ stop locate

# Add a hot‑spare drive (optional DG list, enclosure affinity, non‑revertible)
perccli /cX/eY/sZ add hotsparedrive [DGs=0,1,2][enclaffinity][nonrevertible]

# Delete a hot‑spare drive
perccli /cX/eY/sZ delete hotsparedrive

# Delete foreign configuration (add security key if required)
perccli /cX/fx|fall del [securitykey=sssssssssss]

# Import foreign configuration (preview optional)
perccli /cX/fx|fall import [preview][securitykey=sssssssssss]

# Show foreign configuration (add "all" to list all)
perccli /cX/fx|fall show [all][securitykey=sssssssssss]

若要安裝 PERCCLI，請參閱：PowerEdge：如何在 Red Hat Linux、Ubuntu Linux、VMware ESXi 和 Windows Server 上安裝 PERCCLI 公用程式

PERC 9/10/11 命令列指南 - https://www.dell.com/support/manuals/en-in/perc-h750-sas/perc_cli_rg/Overview?guid=guid-85a3c53c-4b87-42be-a787-7ed23993297f⟨=en-us

PERC 11/12 命令列指南 - https://www.dell.com/support/manuals/en-us/perc-h965i-mx/perc12_cli_rg/working-with-the-perc-command-line-interface-tool?guid=guid-d44fef6f-7a59-4612-a65e-0bdc9e0dd842⟨=en-us