Dell Chassis Management Controller Version 6.20 for PowerEdge M1000e RACADM CLI Guide

Introduction

This document provides information about the RACADM subcommands, supported RACADM interfaces, and property database groups and object definitions for the following:

iDRAC for Blade Servers
iDRAC on Rack and Tower Servers

Most of the commands mentioned in this document are applicable for multi-generation servers. That is, the commands are applicable for iDRAC6, iDRAC7, and iDRAC8. For more information on the commands applicable for a particular iDRAC version, see the iDRAC RACADM Support Matrix available at www.dell.com/esmmanuals

NOTE:
- From iDRAC version 2.00.00.00, the guide provides information specific to iDRAC. For information specific to Chassis Management Controller (CMC) M1000e, refer to Chassis Management Controller M1000e Version 6.2 RACADM Command Line Reference Guide available at www.dell.com/cmcmanuals .
- The appendix section in the guide provides:
  - List of deprecated sub-commands.
  - List of legacy groups and objects with the equivalent new groups and objects.

欢迎

欢迎访问戴尔

Dell Chassis Management Controller Version 6.20 for PowerEdge M1000e RACADM CLI Guide

Introduction

对此内容评级