Inspiron 5505 Service Manual

Installing the power-adapter port

If you are replacing a component, remove the existing component before performing the installation procedure.

The figure indicates the location of the power-adapter port and provides a visual representation of the installation procedure.

Image: Installing th epower-adapter port

Place the power-adapter port into the slot on the palm-rest and keyboard assembly.
Replace the screw (M2x3) that secures the power-adapter port to the palm-rest and keyboard assembly.
Route the power-adapter port cable along the routing guide on the system board.
Connect the power-adapter port cable to the system board.
Adhere the tape to secure the power-adapter port cable to the system board.
Lower the right display-hinge plate and ensure that the screw holes are aligned with the screw holes on the system board.
Replace the screw (M2.5x3.5) and the two screws (M2.5x5) that secure the right display hinge to the system board.