Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

iDRAC 8/7 v2.30.30.30 User’s Guide

PDF

Blinking or unblinking component LEDs using web interface

To blink or unblink a component LED:
  1. In the iDRAC Web interface, go to any of the following pages as per your requirement:
    • Overview > Storage > Identify - Displays the Identify Component LEDs page where you can blink or unblink the physical disks, virtual disks, and PCIe SSDs.
    • Overview > Storage > Physical Disks > Identify – Displays the Identify Physical Disks page where you can blink or unblink the physical disks and PCIe SSDs.
    • Overview > Storage > Virtual Disks > Identify - Displays the Identify Virtual Disks page where you can blink or unblink the virtual disks.
  2. If you are on the Identify Component LED page:
    • Select or deselect all component LEDs — Select the Select/Deselect All option and click Blink to start blinking the component LEDs. Similarly, click Unblink to stop blinking the component LEDs.
    • Select or deselect individual component LEDs — Select one or more component(s) and click Blink to start blinking the selected component LED(s). Similarly, click Unblink to stop blinking the component LEDs.
  3. If you are on the Identify Physical Disks page:
    • Select or deselect all physical disk drives or PCIe SSDs — Select the Select/Deselect All option and click Blink to start blinking all the physical disk drives and the PCIe SSDs. Similarly, click Unblink to stop blinking the LEDs.
    • Select or deselect individual physical disk drives or PCIe SSDs — Select one or more physical disk drives and click Blink to start blinking the LEDs for the physical disk drives or the PCIe SSDs. Similarly, click Unblink to stop blinking the LEDs.
  4. If you are on the Identify Virtual Disk page:
    • Select or deselect all virtual disks — Select the Select/Deselect All option and click Blink to start blinking the LEDs for all the virtual disks. Similarly, click Unblink to stop blinking the LEDs.
    • Select or deselect individual virtual disks — Select one or more virtual disks and click Blink to start blinking the LEDs for the virtual disks. Similarly, click Unblink to stop blinking the LEDs.

    If the blink or unblink operation is not successful, error messages are displayed.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\