Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

iDRAC 8/7 v2.30.30.30 User’s Guide

PDF

Converting physical disks to RAID capable or non-RAID mode using the iDRAC web interface

To convert the physical disks to RAID mode or non-RAID mode, perform the following steps:
  1. In the iDRAC web interface, click Overview > Storage > Physical Disks > Setup . The Setup page is displayed.
  2. From the Controller drop-down menu, select a controller. The physical disks associated with the selected controller are displayed.
  3. From the Action — Assign to All drop-down box, select the required option ( Convert to RAID or Convert to Non-RAID) for all the disks, or select the option for specific disks from the Action drop-down menu.
  4. From the Apply Operation Mode drop-down menu, select when you want to apply the settings.
  5. Click Apply. The settings are applied based on the option selected in the operation mode.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\