Unlock Setup Status
|
Displays if the setup status is unlocked.
|
Admin Password Status
|
Displays if the administrator password is clear or set.
Default: Not set
|
System Password Status
|
Displays if the system password is clear or set.
Default: Not set
|
Admin Password
|
Allows you to set, change, or delete the administrator(admin) password.
The entries to set password are:
- Enter the old password:
- Enter the new password:
- Confirm new password:
Click
OK once you set the password.
NOTE For the first time login, "Enter the old password:" field is marked to "Not set". Hence, password has to be set for the first time you login and then you can change or delete the password.
|
System Password
|
Allows you to set, change, or delete the System password.
The entries to set password are:
- Enter the old password:
- Enter the new password:
- Confirm new password:
Click
OK once you set the password.
NOTE For the first time login, "Enter the old password:" field is marked to "Not set". Hence, password has to be set for the first time you login and then you can change or delete the password.
|
Strong Password
|
Allows you to enforce the option to always set strong password.
This option is not set by default.
|
Password Configuration
|
You can define the length of your password. Min = 4, Max = 32
|
Password Bypass
|
Allows you to bypass the System password and the Internal HDD password, when it is set, during a system restart.
Choose one of the options:
- Disabled:Always prompt for the system and internal HDD password when they are set. This option is enabled by default.—Default
- Reboot bypass:Bypass the password prompts on Restarts (warm boots).
|
Password Change
|
Allows you to change the System password when the administrator password is set.
- Allow Non-Admin Password Changes
This option is enabled by default.
|
Non-Admin Setup Changes
|
Allows you to determine whether changes to the setup options are allowed when an Administrator Password is set. If disabled the setup options are locked by the admin password.
- Allow Wireless Switch Changes
This option is not set by default.
|
UEFI Capsule Firmware Updates
|
Allows you to update the system BIOS via UEFI capsule update packages.
- Enable UEFI Capsule Firmware Updates
This option is enabled by default.
|
TPM 2.0 Security
|
Allows you to enable or disable the Trusted Platform Module (TPM) during POST.
The options are:
- TPM On—Default
- Clear
- PPI Bypass for Enable Command—Default
- PPI Bypass for Disbale Command
- PPI Bypass for Clear Command
- Attestation Enable—Default
- Key Storage Enable—Default
- SHA-256—Default
Choose one of the options:
|
TPM Security
|
Allows you to enable the Trusted Platform Module (TPM) during POST.
Default Setting: This option is not set by default.
|
PPI Bypass for Clear Command
|
Enables you to control the TPM Physical Presence Interface (PPI). When enabled, this setting will allow the OS to skip BIOS PPI user prompts when issuing the Clear command. Changes to this setting take effect immediately.
|
Computrace (R)
|
Allows you to activate or disable the optional Computrace software.
The options are:
- Deactivate
- Disable
- Activate—Default
|