Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Inspiron 7586 Service Manual

PDF

Procedure

  1. Place the display panel on a clean and flat surface.Image: Display panel
  2. Replace the display cable.
  3. Replace the camera.
  4. Remove the release paper from the SR tapes.Image: Removing the release paper from the SR tape
  5. Align both the SR tapes to the plastic edge of the display back-cover and antenna assembly and paste them.
  6. Remove the blue release paper of SR tape.Image: Removing the release paper from the SR tape
  7. Slide the top of display panel into the display back-cover and antenna assembly and place the display panel onto the display back-cover and antenna assembly. Image: Replacing the display panel
  8. Replace the two screws (M2x3) that secure the display panel to the display back-cover and antenna assembly.
  9. Route the display cable and the touchscreen-board cable through the routing guides on the display hinge.
  10. Place the display bezel on the display back-cover and antenna assembly and snap it into place.Image: Replacing the display bezel
  11. Remove the release paper from the pressure film.Image: Removing the release paper from the pressure film
  12. Adhere the pressure film on the display panel.
  13. Using the flat end of the plastic scribe, press the pressure film until it turns red.
  14. Peel off the pressure film from the display panel. Image: Peeling off the pressure film

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\