OptiPlex 7060 Micro Service Manual

Installing the WLAN card

1. To install the WLAN card:
   1. Insert the WLAN card into the connector on the system board [1].
   2. Connect the WLAN antenna cables to the connectors on the WLAN card [2].
   3. Place the plastic tab to secure the WLAN cables [3].
   4. Replace the single (M2X3.5) screw to secure the plastic tab to the WLAN card [4].
      
2. Install the:
   1. 2.5 inch hard drive assembly
   2. Side cover
3. Follow the procedure in After working inside your computer.