Dell Vostro 3580 Service Manual

Removing the display assembly

1. Open the latch and disconnect the optical drive cable and display cable from the system board [1, 2].
2. Peel off the tape securing the wireless antenna from the system board [3].
3. Unroute the display cable from the routing guides on the palmrest and keyboard assembly [4].
   
4. Remove the five (M2.5x5) screws that secure the left and right hinges to the system board, and palmrest and keyboard assembly [1].
5. Lift the palmrest and keyboard assembly at an angle [2].
   
6. Lift the hinges. Remove the palmrest and keyboard assembly off the display assembly [1, 2]
   
7. After performing all the preceding steps, you are left with display assembly.