Table 1. System Configuration.
The table describes the system configuration options.
Option
Description
Integrated NIC
Allows you to
configure the integrated network controller.
Click one of the following options:
Disabled
Enabled
Enabled w/PXE—Default
SATA Operation
Allows
you to configure the operating mode of the integrated SATA hard-drive controller.
Click one of the following options:
Disabled
AHCI
RAID On—Default
NOTE: SATA is
configured to support RAID mode.
Drives
Allows you to enable or disable various drives on board.
The options are:
SATA-0
SATA-2
M.2 PCIe SSD-0
All the options are set by default.
SMART Reporting
This field controls whether hard drive errors for
integrated drives are reported during system startup. This technology
is part of the SMART (Self Monitoring Analysis and Reporting Technology)
specification. This option is disabled by default.
Enable SMART Reporting
USB Configuration
Allows you to
enable or disable the internal/integrated USB configuration.
The options are:
Enable USB Boot Support
Enable External USB Ports
All the options are set by default.
NOTE: USB keyboard
and mouse always work in the BIOS setup irrespective of these settings.
Audio
Allows you to enable
or disable the integrated audio controller. By default, the
Enable Audio option is selected.
The options are:
Enable Microphone
Enable Internal Speaker
This option is set by default.
Keyboard Illumination
This field lets you choose the operating mode of the
keyboard illumination feature. The keyboard brightness level can be
set from 0% to 100%.
The options are:
Disabled
Dim
Bright—Default
Keyboard Backlight Tmeout on AC
Allows to define the timeout value for the keyboard backlight when an AC adapter is plugged in the system. The Keyboard Backlight
tiemout value is only in effect when the backlight is enabled.
5 seconds
10 seconds—Default
15 seconds
30 seconds
1 minute
5 minutes
15 minutes
Never
Keyboard Backlight Tmeout on Battery
Allows to define the timeout value for the keyboard backlight when the system is running only on battery power. The Keyboard
Backlight tiemout value is only in effect when the backlight is enabled.
5 seconds
10 seconds—Default
15 seconds
30 seconds
1 minute
5 minutes
15 minutes
Never
Miscellaneous devices
Allows you to enable or disable various on board devices.
Enable Camera—Default
Enable Hard Drive Free Fall Protection—Default
Enable Secure Digital (SD) Card—Default
Secure Digital (SD) Card Boot
Secure Digital Card (SD) Read-Only Mode
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\