Table 1. Power Management.
The table describes the power management options.
Option
Description
AC Behavior
Allows you to enable or disable the computer from
turning on automatically when an AC adapter is connected.
Wake on AC
This option is not set by default.
Enable Intel Speed Shift Technology
Allows you to enable or disable the Intel Speed Shift Technology.
Enabled—Default
Auto On Time
Allows you to set the time at which the computer must
turn on automatically.
The options are:
Disabled—Default
Every Day
Weekdays
Select Days
This option is not set by default.
USB Wake Support
Allows you to enable USB devices to wake the system
from standby.
Enable USB Wake Support
This option is not set by default.
Wake on LAN
This option allows the computer to power up from
the off state when triggered by a special LAN signal. Wake-up from
the Standby state is unaffected by this setting and must be enabled
in the operating system. This feature only works when the computer
is connected to AC power supply.
Disabled—Default - Does not allow the system to power
on by special LAN signals when it receives a wake-up signal from the
LAN or wireless LAN.
LAN Only - Allows the system to be powered
on by special LAN signals.
Block Sleep
This option minimizez AC power usage at times of peak demand.
Peak Shift
Allows you to block entering to sleep in OS environment.
Advanced Battery Charge Configuration
This option enables you to maximize the battery health.
By enabling this option, your system uses the standard charging algorithm
and other techniques, during the non-work hours to improve the battery
health.
Primary Battery Charge Configuration
Allows you to select the charging mode for the battery.
The options are:
Adaptive—Default
Standard - Fully charges your battery at a standard
rate.
ExpressCharge- The battery charges over a shorter
period of time using Dell’s fast charging technology.
Primarily AC use
Custom
If Custom Charge is selected, you can also configure Custom Charge
Start and Custom Charge Stop.
NOTE: All charging mode may
not be available for all the batteries. To enable this option, disable
the
Advanced Battery Charge Configuration option.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\