Skip to main content

Dell Wyse ThinLinux 1.0.3 Administrator’s Guide

PDF

HAgent

WDM is a device management solution which helps you to manage cloud clients securely from remote infrastructure. WDM management solution involves both server and client components where client software also known as HAgent should be installed on each thin client device for management through WDM.

Figure 1. HAgent Settings

On Wyse Device Manager (HAgent) page, enter the Wyse Device Manager Server name in input box.

The following options can be configured. This is an admin only configuration in the thin client.

Table 1. Wyse Device Manager Server . The following table lists the different parameters:
Parameter	Description
Enable Auto Device Discovery	Click the ON/OFF button to enable or disable this option. This option enables or disables the discovery of Thin Clients by DNS Hostname , DNS SRV record Lookup , DHCP option Tags.
DNS Hostname	Click the ON/OFF button to enable or disable this option. This option will take effect if Enable Auto Device Discovery is in OFF state. When this option is in ON state, then the clients are discoverable using DNS Host name.
DNS SRV record Lookup	Click the ON/OFF button to enable or disable this option. Auto Device Discovery is in OFF state. When this option is in ON state, then the clients are discoverable using DNS SRV record lookup.
DHCP option Tags	Click the ON/OFF button to enable or disable this option. This option will take effect if Enable Auto Device Discovery is in OFF state. When this option is in ON state, then the clients are discoverable using DHCP options Tags.
Manual Discovery From WDM	Click the ON/OFF button to enable or disable this option. If this option is enabled, the WDM server will be able to discover the client through manual discovery.
Auto Discovery after missed checkins	Enter the Auto Discovery after missed checkins. The allowable number of missed check-in attempts before going for auto discovery of Wyse Device Manager.

Click Save to save the changes.