Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

XPS 15 9520 Service Manual

Removing the right fan

Prerequisites

  1. Follow the procedure in Before working inside your computer.
  2. Remove the base cover.

About this task

The following images indicate the location of the right fan and provide a visual representation of the removal procedure.

Image: Removing right fan

Steps

  1. Remove the two screws (M2x4) that secure the I/O-board FPC bracket to the right fan and the palm-rest and keyboard assembly.
  2. Lift the I/O-board FPC bracket off the system board.
  3. Remove the screw (M2x4) that secures the fan to the system board.
  4. Disconnect the right-fan cable from the system board.
  5. Partially lift the left side of the right fan and slide it to the left to remove it from the palm-rest and keyboard assembly.
    CAUTION:Do not hold the fan assembly at the center, as it may damage the center bearing.
    CAUTION:When removing the fan, do not lift the fan up directly as this may damage the fan.
    Image: Removing right fanImage: Removing right fan
    NOTE:The images that are shown above are for the right fan, but the same information applies for the left fan.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\