Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

XPS 15 9520 Service Manual

Removing the battery

Prerequisites

  1. Follow the procedure in Before working inside your computer.
  2. Remove the base cover.
    NOTE: Disconnecting the battery cable, removing the battery, or draining the flea power clears the CMOS and resets the BIOS settings on your computer.

About this task

To disconnect the battery cable, release the pull tab located under the battery cable and use it to disconnect the battery cable.

The following image indicates the location of the battery and provides a visual representation of the removal procedure.

Image: Removing the battery

Steps

  1. Disconnect the battery cable from the system board, if it was not disconnected earlier.
  2. Remove the four screws (M2x4) that secure the battery to the palm-rest and keyboard assembly.
  3. Remove the four screws (M2x3) that secure the battery to the palm-rest and keyboard assembly.
  4. Peel the tapes that secure the speaker cable to the battery.
  5. Lift the battery off the palm-rest and keyboard assembly.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\