Dell Wyse ThinOS Version 8.6 Administrator’s Guide

Configuring the Teradici Cloud Access broker connection

To configure the Teradici Cloud Access broker setup:

From the desktop menu, click System Setup, and then click Remote Connections.
The Remote Connections dialog box is displayed.
Figure 1. Broker setup - Teradici Cloud Access
On the Broker Setup tab, from the Select Broker Type drop-down list, select Teradici Cloud Access, and configure the following options:
- Broker Server—Enter the IP address or FQDN of the broker server.
- Auto Connect List—Enter the name of desktops that you want to start automatically after logging in to the respective broker. Use a semicolon to separate each desktop name.
  NOTE: Field values are case-sensitive.
- Security mode—Select your preferred security mode from the following options:
  - Warning—Warn Security requires an FQDN address with a self-signed certificate, or without any certificate. However, a corresponding warning message is displayed for the user to continue.
  - Full—Full Security requires an FQDN address with a domain certificate.
  - Low—Security allows an FQDN or an IP address with or without a certificate.
  - Default—Follows global security mode settings.
- Connection Protocol—By default, the option is set to PCoIP Only.
Click OK to save your settings.