Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell Docking Station WD19 Thunderbolt User Guide

PDF

Thunderbolt Security

The settings below configure the Thunderbolt adapter security settings within the operating system. Security Levels are not applicable or enforced in the Pre-boot environment.
  • No Security: Automatically connect to devices plugged into the Thunderbolt port.
  • User Authorization: Approval is required for any new devices connected to the Thunderbolt port.
  • Secure Connect: The Thunderbolt adapter port will only allow connection to devices that have been configured with a shared key.
    NOTE The first time a Thunderbolt peripheral’s Unique ID is granted “always connect” PCIe access, a secure encrypted key is written to the peripheral controller’s non-volatile memory and added to the host PC’s ACL list. Each time a peripheral’s Unique ID is found on the ACL, the PC’s controller sends a security challenge and the response from the peripheral is then verified before the PCIe connection is allowed. If the response is not valid, the user receives a connection permission prompt. This capability, when enabled, prevents pre-SL2 capable peripherals from connecting to a PC; thereby preventing a potential HW spoofing of an approved device to generate a DMA exploit (beyond what is prevented with SL1).
  • DisplayPort Only: Automatically connect to DisplayPort devices only. No Thunderbolt adapter or PCIe devices are allowed to connect.

In the BIOS of a Dell Thunderbolt-enabled PC, you will be able to configure the security settings of the Thunderbolt connection. You can find the configuration options in the BIOS path: System Configuration > USB / Thunderbolt Configuration.

Table 1. Thunderbolt configurationThunderbolt configuration
Security settingDescription
No security Allow legacy Thunderbolt devices to auto-connect – the CM auto connects a new device plugged in.
User Authorization Allow User Notification devices at minimum – the CM requests connection approval from the host SW and auto-approval may be given based on the Unique ID of the connecting device.
Secure Connect Allow one-time saved key devices at minimum – the CM requests connection approval from the host SW and auto-approval is only given if the host challenge to the device is acceptable.
DisplayPort Only Allow DisplayPort sinks to be connected (re-driver or DP tunnel, no PCIe tunneling).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\