Procedure
- Lift the connector latches and disconnect
the optical-drive connector board cable and status-light board cable
from the system board.
- Lift the connector latches and disconnect the
hard-drive cable and the I/O-board cable from the system board.
- Lift the connector latches and disconnect the
touchpad cable from the system board.
- Lift the connector latch and disconnect the
keyboard cable from the system board.
- Disconnect the coin-cell battery cable and
speaker cable from the system board.
- Remove the screws that secure the system board
assembly to the palm rest and keyboard assembly.
- Carefully lift the system board assembly from
the inner edge to release the system board assembly from the palm
rest and keyboard assembly.
- Turn the system board assembly over.
- Disconnect the power-adapter port cable from
the system board.
- Lift the latch and disconnect the power-button
cable from the system board.
- Peel off the power-button cable from the back
of the heat-sink assembly.
- Remove the heat-sink assembly.
Data is not available for the Topic