Removing system
board
Steps
- Follow the procedure in Before working inside
your computer.
- Remove the:
- cover
- 2.5–inch drive assembly
- system fan
- heat sink
- processor
- To remove the plastic tab:
- Remove the screw that secures the plastic
tab to the system board [1].
- Lift the plastic tab away from the system
board [2].
- To remove the system board:
- Remove the #6-32*5.4 screws that secure
the system board to the computer [1].
- Slide the system board to disengage the
connectors from the back of the computer [2].
- Lift the system board away from the computer
[3].
Data is not available for the Topic