Installing processor
- To install the
processor:
- Place
the processor on the socket such that the slots on the processor align
with the socket keys [1].
CAUTION: Do not use force to seat the processor. When the processor
is positioned correctly, it engages easily into the socket.
- Close
the processor shield by sliding it under the retention screw [2].
- Lower
the socket lever and push it under the tab to lock it [3].
- Install the:
- Heat sink
- Heat sink blower
- 2.5–inch hard drive assembly
- Side cover
- Follow the procedure in After working inside
your computer.
Data is not available for the Topic