Table 1. Power ManagementThe following table describes the information about
the computer’s power management:
Option
Description
AC Recovery
Determines how the system responds when AC power
is re-applied after a power loss. You can set the AC Recovery to:
Power Off
Power On
Last Power
State
This option is set to Power Off by default.
Enable Intel Speed Shift Technology
Allows you to enable or disable Intel Speed Shift
Technology support. The option Enable Intel Speed Shift Technology is set by default.
Auto On Time
Sets time to automatically turn on the computer.
Time is kept in standard 12-hour format (hour:minutes:seconds).
Change the startup time by typing the values in the time and AM/PM
fields.
NOTE:This
feature does not work if you turn off your computer using the switch
on a power strip or surge protector or if Auto Power is set to
disabled.
Deep Sleep Control
Allows you to define the controls when Deep Sleep
is enabled.
Disabled
(default)
Enabled
in S5 only
Enabled in
S4 and S5
Fan Control Override
The option is not set by default
USB Wake Support
Allows you to enable the USB devices to wake the
computer from standby mode. The option "Enable USB Wake Support" is selected by default
Wake on LAN/WWAN
This option allows the computer to power up from
the off state when triggered by a special LAN signal. This feature
only works when the computer is connected to AC power supply.
Disabled - Does not allows the system to power on by special LAN signals
when it receives a wake-up signal from the LAN or wireless LAN.
LAN or WLAN - Allows the system to be powered on by special LAN
or wireless LAN signals.
LAN Only - Allows the system to be powered on by special LAN signals.
LAN with
PXE Boot - A wakeup packet sent to the system in either the S4
or S5 state, that will cause the system to wake-up and immediately
boot to PXE.
WLAN Only - Allows the system to be powered on by special WLAN signals.
This option is set to Disabled by default.
Block Sleep
Allows you to block entering to sleep (S3 state)
in OS environment. This option is disabled by default.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\