Installing the inner frame
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the inner frame and provides a visual representation of the installation procedure.
Steps
- Locate the Inner frame slot on your computer.
- Align and place the inner frame into the slot on your computer.
- Install the five (M2x5) and six (M2x3) that secure the inner frame to the computer.
- Route the WWAN and WLAN card cable through the retention clips on the frame.
- Route the Speaker through the retention clips and connect it to the system board.
Data is not available for the Topic