Installing the keyboard bracket
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the keyboard bracket and provides a visual representation of the installation procedure.
Steps
- Locate the keyboard bracket slot on your computer.
- Align and place the keyboard on the keyboard bracket.
- Press down on the lattice at the snap points, in order to secure
the keyboard assembly to the palmrest.
NOTE: The keyboard has multiple snap points on the lattice side which must be pushed down firmly after the keyboard is replaced.
- Install the eleven (M2x2) screws to secure the keyboard to the keyboard bracket.
Data is not available for the Topic