Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell Precision 7920 Tower Owner's Manual

Removing the Center System fan/HDD fan

  1. Follow the procedure in Before working inside your computer .
  2. Remove the:
    1. side cover
    2. front bezel
    3. 5.25 inch ODD bracket
  3. To remove the Center System fan/HDD fan:
    1. Press the connector tab and disconnect the two fan cables from the system board.
      NOTE:Do not pull the connector by the cable wires. Instead, disconnect the cable by pulling on the connector end. Pulling on the cable wires may loosen them from the connector.
    2. Remove the screws [1] securing the Center System fan/HDD fan to the system board and lift the Center System fan/HDD fan up [2] .

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\